Chapter
4
Coax Interface Menu
Compatibility Options Menu
The Compatibility Options menu allows you to select special printer functions
in the non–SCS mode, based on the capabilities of the printer emulated.
Compatibility
Options
(from page 85)
Compatibility
Compatibility
Option 1
Option 2
On*
On*
Off
Off
Compatibility
Compatibility
Option 6
Option 7
Off*
Off*
On
On
Compatibility Option 1:
Carriage Return at MPP+1
MPP is Maximum Print Position, which is also known as line length. OPTION
1 controls a carriage return at the end of a print line and at MPP+1.
•
ON (the default). Produces a carriage return to the first print position of
the next line.
•
OFF. Produces a carriage return to the first print position of the current
line.
94
(4234 only)
Compatibility
Compatibility
Option 3
Option 4
Off*
On*
On
Off
(3287 only)
Compatibility
Compatibility
Option 8
Option 9
Off*
On*
On
Off
To cycle through the menus and its
options, press MENU then:
↑
Scroll/
Micro
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
* = Factory Default
Compatibility
Option 5
Off*
On
(SCS data stream only)
Compatibility
Option 10
Off*
On
↓
Scroll/
OR
Micro