Graphics Option
Slashed Zero
•
Disable (the default). Prints zeros without a slash (0).
•
Enable. Prints zeros with a slash (Ø) to distinguish zeros from the
alphabetical capital "O."
Ignore Dots Value
•
Disable (the default)
•
Enable. Causes the Code V to expect position values to be specified in
only 1/10 of an inch. If the dot position is also given, it is treated as text.
Append Rotated
•
Disable (the default). Appends logos to an alphanumeric string rotated in
a clockwise, counterclockwise, or inverted orientation.
•
Enable. When enabled, the logo is treated as a separate element.
Truncate Off Page Alpha
When enabled, this parameter prevents the printing of Error 48 (Element Off
Page Error) if alphanumeric data, including spaces, extends beyond the right
side of the form.
•
Enable (the default)
•
Disable
True Vertical 1/10
Determines if a vertical 1/10 of an inch parameter is used as 1/10 of an inch
(Enabled) or as 7/72 of an inch (Disabled). When used as 1/10 of an inch,
rounding will occur to the nearest 1/72 of an inch. This can cause vertical
moves that have the same value to differ by _1/72 of an inch. When used as
7/72 of an inch, the absolute move is slightly smaller than expected. For
example, a one inch move would be 70/72 of an inch. Vertical moves that
have the same value will be identical in length.
•
Disable (the default).
•
Enable
Absorb At ^PY
•
Absorb Motion (the default). Prevents paper motion following a system
terminator in a graphics (cc) PY command.
•
Absorb All. When absorb all is selected, the system ignores all the data
and terminator until a host generated terminator is detected.
•
Disable. When disabled, system terminators following a graphics
command are sent to the printer and result in paper motion.
Code V Emulation Menu
179