InfoPrint 6500 User Manual page 45

Configuration
Management
Recall Save Current
Custom Set Values
Name
Custom Sets Custom Set
The Print Custom Set Values selection on the Configuration Management
menu allows you to print any or all of the configurations shown above. The
default setting, "Current Custom Set," will print the same information as
pressing the Printer Configuration key. The Current Custom Set is the Power
On configuration until you begin modifying the printer configuration.
Custom sets 1 through 4 do not exist until you save configuration parameters
to them. You must define and save a custom set before you can print it.
Custom/Preload Sets 5 through 8 contain configuration sets that assist with
the installation and configuration of this printer.
The other options will only be useful once you have modified and saved the
printer configuration parameter settings.
The Power On Custom Set is defined by the "Change Power On Set" option.
Custom Sets 1 through 8 are defined by the "Save Current Values" option.
These options are described in detail under the Configuration Management
Menu description starting on page 72.
Delete Change
Custom Set
Reset
Names
Printing the Current Configuration
Entering Program Mode
Protect
Power Custom Sets
On Set
* = Factory Default
Print Custom
Set Values
Current Quick Setup
Current Custom Set
Factory Default
Power On Custom Set
All Custom Sets
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preload Set 5
Custom/Preload Set 6
Custom/Preload Set 7
Custom/Preload Set 8
45