InfoPrint 6500 User Manual page 73

Recall Custom Set
The printer can store 8 custom sets in NVRAM. This parameter allows you to
select and load a specific custom set.
•
Factory Default (the default). The factory–preset custom set; its
parameters cannot be changed. It is always available for loading.
Custom/Preload Sets 5-8 contain configuration sets that assist with the
installation and configuration of this printer. These sets are preloaded at the
factory. If these sets are not used, you can delete them and create new
custom sets.
Following is a brief description of Custom/Preload Sets 5 – 8:
•
Custom/Preload Set 5
like a Printronix printer. This custom set contains ASCII emulations used
by Printronix compatible printers along with initial defaults (Overstrike,
Auto LF, etc.). The initial ASCII default emulation is P-Series which may
need to be altered for P-Series XQ or Serial Matrix in some applications.
This option is defined only in CT or CT/IPDS builds. For more information,
refer to the Configuration Utility Diskette shipped with this printer, or the
InfoPrint 6500 Line Matrix Printers: ASCII Programmer's Reference
Manual.
• Custom/Preload Set 6
printer using a set of Epson and Proprinter default values. This could be
useful when the printer has the Coax/Twinax feature, but is sometimes
run as an ASCII printer. This option is defined only in IGP, CT and
CT/IPDS builds. Refer to the InfoPrint 6500 Line Matrix Printers: CTA
Programmer's Reference Manual for more information.
•
Custom/Preload Set 7
without IPDS. This could be useful when the printer contains the IPDS
feature, but must occasionally be used as a non-IPDS printer. This option
is defined only in CT/IPDS builds. Refer to the InfoPrint 6500 Line Matrix
Printers: IPDS Programmer's Reference Manual or the InfoPrint 6500
Line Matrix Printers: CTA Programmer's Reference Manual for more
information.
•
Custom/Preload Set 8
Interpreter box. This option is defined only for Non-CT IGP and ASCII
builds.
Configuration Management Menu
is used when configuring this printer to function
contains the default settings for an ASCII
contains default settings for a Twinax printer
sets up the printer for an external CT
73