InfoPrint 6500 User Manual page 37

Parallel Serial
5
Interface Interface
page 136 page 146
Interface Type Interface Type
PC Parallel Data Protocol
Dataproducts Baud Rate
IEEE 1284 Data Bits
Parallel Hotport Stop Bits
Parity
Data Terminal Ready
Request To Send
Buffer Size In Kbytes
Poll Character
One Char Enquiry
Serial Hotport
Framing Errors
1
NOTE: The Twinax and Coax interface menus only appear in the menus if the Coax/Twinax
feature is installed.
2
The Early Print Complete option appears in the Twinax menu only if the IPDS feature is
installed.
3
IPDS, Code V Emulation, and IGP Emulation options appear in the menus only if these
features are installed.
4
Ethernet information only appears when the ethernet feature is installed.
5
Ether the Ethernet Interface menu or the Parallel Interface menu will display. They
cannot display at the same time.
6
If installed.
7
Not if 4234-12 is running IPDS code.
8
Only if Autoswitching is enabled.
9
Only if Coax Emulation is enabled.
10
The 5250 and 3270 Interface menu only appear in the menus if the TN5250/3270
feature is installed.
11
Only if ANSI is selected.
Active versus Saved Configurations
Emulation
Configuration
page 152
3
IPDS
Active Graphic Emulation
6
ANSI
3
IGP Emulation
3
Code V Emulation
ASCII Printer
Emulation
Printer Emul Config
Print Format
Figure 6. Configuration Main Menu (con't)
The Configuration Main Menu
Operator Printer
Print Tests Information
page 210 page 212
Printer Demonstration* Installed Memory
Print Error Log Power On Time
Print Ribbon Log Printing Time
Ripple Print Print Strokes
All E's 11 Inch Pages
All H's
All E's + FF
Underlines
4
Adapter Test Page
4
Ethernet Test Page
Clear Error Log
37