InfoPrint 6500 User Manual page 283

Fault Message
INCOMPAT E-NET
INTAKE FAN FAULT
INTERRUPT UNUSED
VECTOR 00
LOADING PROGRAM FROM
PORT XX%
LOADING PROGRAM
INTO FLASH
NOT READY
ONLINE
CU TIMED OUT
OPERATOR MENU
<first menu item>
OPERATOR MENU LOCKED
Table 9: Fault Messages
Operator
Explanation
Correctable?
Yes Incompatible ethernet
interface card is
installed.
Yes Sensors cannot
detect current in fan
circuit.
No The controller board
receives an interrupt it
does not understand.
N/A The new emulation
program is loading
into printer RAM.
XX% indicates how
much of the program
has loaded.
N/A The printer has
deleted the previous
program from flash
memory and is
loading the new
program into flash
memory.
N/A Printer state
message: printer is
offline, not in
communication with
host.
No Controller unit timed
out.
N/A Non–error status
message.
N/A Non–error status
message.
Fault Correction Procedure
Solution
Install a compatible
ethernet interface card to
the printer then reboot. If
this message still appears,
contact your InfoPrint
service representative.
See description for HMR
BANK FAN FLT.
Cycle power. If this
message occurred once
and never again, you can
ignore it. If the message
reappears or appears
consistently, contact your
InfoPrint service
representative.
No action required.
No action required.
No action required.
Contact your InfoPrint
service representative.
No action required.
No action required.
283