Print Format
(continued from
page 200)
Reset
Command
Load Factory*
Load Power On
NOTE:
* = Factory Default
1
These variables are not available with the Coax/Twinax
emulation selected.
2
To select forms width in characters greater than 136
characters for coax/twinax, you must first change
maximum printable width to 13.6 inches.
3
Does not apply to IPDS.
Host
Command
Ignore Codepage
Disable*
Enable
Ignore Form Line
Disable*
Enable
Ignore ESC X
Disable*
Enable
Ignore Unidirectional
Disable*
Enable
Ignore LPI
Disable*
Enable
Ignore CPI
Disable*
Enable
Ignore All
Disable*
Enable
Print Format Menu
To cycle through the menus and its
options, press MENU then:
↑
Scroll/
OR
Micro
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
↓
Scroll/
Micro
201