Chapter
4
Network Setup Menu
Wireless LEAP
Wireless
2
LEAP
(from page 116)
Authentication
LEAP
Method
Username
LEAP Username (01-15)
Open*
LEAP Username (16-30)
Shared
1
Kerberos
LEAP Username (31-32)
2
LEAP
NOTE:
* = Factory Default
1
Only if a Symbol radio card is installed.
2
Only if a Cisco radio card is installed.
Authentication Method
This feature allows the user to select the authentication method used for the
wireless network interface.
•
Open (the default). Selects open authentication.
•
Shared. Selects shared key authentication.
•
Kerberos. Selects Kerberos authentication (for use when a Symbol RF
card is installed).
•
LEAP. Selects LEAP authentication (for use with a Cisco RF card
installed).
134
LEAP
Reset LEAP
User
Password
LEAP Password (01-15)
LEAP Password (16-30)
LEAP Password (31-32)
To cycle through the menus and its
options, press MENU then:
↑
Scroll/
Micro
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
Reset LEAP
Password
↓
Scroll/
OR
Micro