DHCP
You can enable/disable the DHCP protocol using this option, but consult your
administrator for the appropriate setting. The options are:
•
Disable (the default)
•
Enable.
Ethernet Parameters Submenu
Ethernet
Parameters
(from page 116)
Buffer Size in
NetBIOS
Kbytes
Protocol
16*
Enable*
(1-16)
Disable
Ethernet
Speed
Control
Auto Select*
Standard*
10 Half Duplex
Enhanced
10 Full Duplex
Off
100 Half Duplex
100 Full Duplex
Detailed information regarding the Ethernet IP Address, Gateway Address,
Subset Mask, and MAC Address capabilities can be found in the InfoPrint
6500 Line Matrix Printers: Ethernet Interface User's Manual. Access to the
parameters is through the operator panel.
ASCII Data
Port Number
9100*
1023 - 65535
Job
Ethernet
Hotport
Timeout
10 Sec.*
10 Sec. - 60 Sec.
Ethernet Parameters Submenu
* = Factory Default
IPDS Data
Keep-Alive
Port Number
Timer
5001*
3 Minutes*
1023 - 65535
2 - 10 Min
To cycle through the menus and its
options, press MENU then:
↑
Scroll/
OR
Micro
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
↓
Scroll/
Micro
123