InfoPrint 6500 User Manual page 129

Antenna Diversity
The type of antenna used:
•
Diverse (default). Select when you want to use the antenna with the best
reception.
•
Primary. Select when you want to use the Primary antenna on the server.
•
Auxiliary. Select when you want to use the Auxiliary antenna on the
server.
Preamble
The length of the preamble in transmit packets.
•
Default. The Wireless option automatically determines the length.
•
Short. For newer printers which can handle higher transer rate speeds.
•
Long. For older printers which cannot handle higher transfer rate speeds.
Power Management
This allows you to set power-save mode and sleep time. A value specifying
the sleep time in milliseconds will be provided. If set to zero, power-save
mode will be disabled. The range includes:
•
0 ms. (default)
•
100 ms. - 1000 ms.
Transmit Power
The power level as a percentage of full power (0 - 100%).
International Mode
When enabled, the Wireless option adapts to international frequency
requirements in Europe. The options include:
•
Disable (default)
•
Enable
Authentication Method
This feature allows the user to select the authentication method used for the
wireless network interface.
•
Open (the default). Selects open authentication.
•
Shared. Selects shared key authentication.
•
Kerberos. Selects Kerberos authentication (for use when a Symbol RF
card is installed).
•
LEAP. Selects LEAP authentication (for use with a Cisco RF card
installed).
Wireless Parameters Menu
129