Twinax Interface Menu - InfoPrint 6500 User Manual

Chapter 4

Twinax Interface Menu

Twinax Interface Menu
Twinax
(4)
Interface
(from page 58)
Print Print Character
3
Language Table
See the following
page.
Early Print
Cancel
Complete
Buffers
Disable*
Enable*
Enable
Disable
Print Text
LAC
Approximation Direction
Control By Host*
On*
Left to Right
Off
Right to Left
To cycle through the menus and its
options, press MENU then:
↑
Scroll/
OR
Micro
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
76
Active Print Twinax Printer
Language Emulation
Standard Print Language* 4234-12*
Alt Print Language 5225
4234-2
Hex
2 Transparent
Control
Lead-In Characters Enable*
Set 1 <%>* Disable
Set 2 ¬¬$
Set 3 _%_
User Defined
User Defined Codes
Start Code 1
Start Code 2
Stop Code
Alternate Set 80-9F
Printable*
Control Code
Override Format
Host Control
Disable* Disable*
Enable Enable
↓
NOTE:
Scroll/
Micro
* = Factory Default
1
If the IPDS feature is installed, the 4234-12 option is the
default, and will appear in this menu. If IPDS is not installed, the
4234-12 option will not appear in this menu, and 4234-2
becomes the default.
2
If the IPDS feature is installed, the EARLY PRINT
COMPLETE option appears in this menu.
3
Does not apply to IPDS.
4
The Twinax and Coax interface menus only appear in the
menus if the Coax/Twinax is installed.
5
Only if Autoswitching is enabled.
Printer
Address
1
Address 1*
Address 2
Address 3
Address 4
Address 5
Address 6
Address 0
Undefined Undefined
Char Report Char Sub
60*
40 - FE (HEX)
Maximum Hex Print
Printable Width Mode
Disable*
13.2 inches*
Enable
13.6 inches
World
Trade
Standard Character Set*
Extended Character Set
Load Alt
Char Option
Enable*
Disable
C/T
3 5
Hotport
Port Type
Twinax*
Coax
Disable
Timeout
15 Sec*
10 Sec - 180 Sec
Report Status
Disable*
Enable