InfoPrint 6500 User Manual page 75

Config Key Default
This option configures the config key to print either the Quick setup menu or
the full config.
•
Quick Setup Config (the default). Prints the Quick setup configuration.
•
Complete Config. Prints the full configuration.
Name Custom Sets
You may specify a 39-character name which can be used to refer to a custom
set. The name you enter for a custom set will be used in the Recall Custom
Set, Save Current Values, Delete Custom Set, Change Power On Set, Protect
Custom Sets, Print Custom Set Values, and Name Custom Sets menus. The
name can only be cleared by using the Reset Custom Set Names menu.
Press the ↑ Scroll/Micro or ↓ Scroll/Micro keys to cycle through the values
available for that character at the cursor location. Press the ↑ Scroll/Micro
key to move to the next character to be modified. Press the ↓ Scroll/Micro
key to go back to a character you have already modified. Press the Form
Feed or Line Feed keys to scroll through the characters. Continue until you
have entered the name you want to give to this custom set, then press
ENTER to save. The name you entered will now represent this custom set on
the printer's front panel. To exit this menu without saving, press any key other
than the ENTER key. The custom set name will revert to the last saved value.
Reset Custom Set Names
You can reset specific custom set names back to the default value of the
configuration number.
Configuration Management Menu
75