InfoPrint 6500 User Manual page 174

Chapter 4
Emulation Configuration Menu
Ignore Character
Ignore Mode
This parameter instructs the IGP to ignore the character selected under the
Select Character menu.
•
Disable (the default). The IGP does not ignore any characters.
•
Enable. The IGP ignores the characters selected under the Selected
Character menu.
Select Character
This instructs the IGP which character to ignore from the host.
•
0 (the default)
•
0 – 255
IGP100 Compatibility
This option allows backward compatibility with older printer models. If you
want your new printer to emulate an older model, select from the following
options:
•
None (the default)
•
MVP. Older printer model.
•
L150. Older printer model.
•
P3000. Older printer model.
•
P6000. Older printer model.
•
P9000. Older printer model.
Expanded Font
This option defines the type of expanded character the IGP/PGL will select.
The following choices are:
•
Block (the default). These are block characters compatible with the IGP-
X00 printers.
•
Alt Block 1. This is a customized block character set that is only available
for the non-overlay multinational group of character sets.
•
Scalable. These expanded characters have rounded edges.
Optimized Ratio
This option selects different bar code ratios for certain bar codes including
Code 39 and interleaved 2 of 5. It is included for compatibility with IGP-X00
printers.
•
Disable (the default). Use standard bar code ratios.
•
Enable. Select the alternate bar code ratios.
174