Running the Printer Self–Tests
Step
Key
1. Make sure that the ribbon is installed and the printer is powered on and loaded with paper.
2. Press
STOP
3.
RETURN
+
4.
MENU
5.
SCROLL/
MICRO
UNTIL
6.
ENTER
7.
SCROLL/
MICRO
UNTIL
8.
ENTER
Result
NOT READY
OPERATOR MENU
ENTER
UNLOCKED
OPERATOR MENU
PRINTER CONTROL
OPERATOR MENU
OPERATOR PRINT TESTS
OPERATOR PRINT TESTS
PRINTER DEMONSTRATION*
OPERATOR PRINT TESTS
[TEST NAME]
OPERATOR PRINT TESTS
[TEST NAME]
Printer Self – Tests
Interior Cleaning
Notes
Places the printer in NOT
READY mode.
Press both keys at the
same time. Unlocking the
Operator Menu allows you
to test your printer.
First of the series of
configuration menus.
Advances to the
OPERATOR PRINT
TESTS menu.
Advances to PRINTER
DEMONSTRATION, the
first option in OPERATOR
PRINT TESTS menu.
Cycles through the list of
print tests until you reach
the name of the test you
wish to run.
The print test you have
selected starts printing at
either 80 or 136 columns,
as specified.
237