InfoPrint 6500 User Manual page 114

Chapter 4
3270 Interface Menu
Compatibility Option 6:
Form Feed Command Position
FORM FEED COMMAND POSITION determines if the position of a form feed
command affects its execution.
•
OFF (the default). Performs a form feed only if it occurs at the first print
position in a line or at Maximum Print Position +1. (The Maximum Print
Position is the line length.) A form feed command at any other position is
recognized as a blank.
•
ON. Allows the printer to perform a form feed command anywhere in the
data stream.
Compatibility Option 7:
Automatic Form Feed at End of Print Buffer
AUTOMATIC FORM FEED AT END OF PRINT BUFFER specifies whether or
not to perform an automatic form feed at the end of a print buffer.
•
OFF (the default). Performs an automatic new line command after
completing a print buffer (unless a form feed, new line, or carriage return
command was the last one executed). The printer is set to print at print
position 1 of the next line.
•
ON. Performs an automatic form feed after completing a print buffer
(unless a form feed command was the last one in the buffer). The printer
is set to print at print position 1 of the first line of the next form.
Compatibility Option 8:
Automatic FF After Operator–Initiated Copy
This option determines the print position after an operator–initiated local copy
(print screen function).
•
OFF (the default). Performs an automatic new line command after
completing a print buffer (unless a new line, form feed or carriage return
command was the last one executed). The printer is set to print at print
position 1 of the next line.
•
ON. Performs an automatic form feed command unless a form feed was
the last one executed. The printer is set to print at print position 1 of the
first line on the next form.
114