InfoPrint 6500 User Manual page 100

Chapter 4
5250 Interface Menu
Print Language
PRINT LANGUAGE specifies the set of print languages used by the printer.
Refer to the previous page for print language menus.
•
Standard Print Language (the default)
•
Alternate Print Language. Provides code pages compatible with 6408/
6412 Model CT0 printers.
Specifying a print quality of OCR A or OCR B will change the print language to
OCR A or OCR B.
When OCR A or OCR B is selected as the default print language, OCR A and
OCR B are the only available values for this print quality. If a different print
quality value is desired, the print language must be changed first.
Print Character Table
PRINT CHARACTER TABLE prints out a table of the 5250 interface current
character set.
Character sets are shown in the InfoPrint 6500 Line Matrix Printers: CTA
Programmer's Reference Manual.
Active Print Language
Selects which group of print language sets (Standard or Alternate) will be
active.
•
Standard Print Language (the default)
•
Alternate Print Language
Hex Transparent Control
This option allows you to enable (the default) or disable additional features
that are not available in standard InfoPrint emulations. To access these
features, send lead-in character text commands in the data stream. You can
also use ASCII codes 80 hex through 9F hex as control codes if configured to
do so.
100