Chapter
4
Emulation Configuration Menu
IPDS Parameters
The IPDS parameters are described on the following pages. Parameters
marked with an asterisk (*) indicate the default value. The printer must be
offline to enter the configuration structure.
Enter and exit the IPDS configuration menu according to the configuration
procedures in Chapter 3, "Configuring the Printer." Pressing an invalid key to
enter a parameter value may move you to another level in the configuration or
exit the configuration menu completely.
BEFORE you reconfigure the IPDS, print a configuration sheet to see all
of the current settings. Refer to "Printing the Current Configuration" on
page 44.
Configure the IPDS according to your specific requirements. The IPDS
configuration menu is shown on the following page.
IPDS Emulation Menu
1
IPDS
(from page 152)
Print
Language
See the
following page.
Bar Code
Quality
High*
Low
Enhanced
Barcode Mode
Disable*
Enable
154
Undefined
Maximum
Char Subst
Printable Width
60*
13.2 inches*
40 - FE
13.6 inches
Image
IPDS Emulation
Quality
Mode
Low*
4234*
High
6408/6412
Compressed
Font
Disable*
Enable
* = Factory Default
Graphics
Override
Host
Quality
Disable*
Medium*
Enable
High
Low
UPC/EAN
Postnet
Barcode Width
Barcode HRI
Standard*
On*
Narrow
Data Stream
Setting