Dataproducts Menu - InfoPrint 6500 User Manual

Dataproducts Menu

The Dataproducts parallel interface is configured using the following
configuration options.
Dataproducts
(from page 136)
Data Bit 8 PI
Ignored
Enable* Enable*
Disable Disable
Buffer Size in Auto
Kbytes Trickle
16* Disable*
(1-16) Enable
Data Bit 8
The DATA BIT 8 parameter allows access to the extended ASCII character
set. When this parameter is disabled, the printer interprets bit 8 of each
incoming data character as a zero, regardless of its actual setting.
•
Enable (the default)
•
Disable.
Data Data Request
Polarity Polarity
Standard* Standard*
Inverted Inverted
Trickle
Time
1/4 sec*
1/2 sec
1 sec
2 sec
4 sec
8 sec
16 sec
To cycle through the menus and its
OFF
options, press MENU then:
↑
Scroll/
Micro
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
Dataproducts Menu
* = Factory Default
Strobe
Polarity
Standard*
Inverted
↓
Scroll/
OR
Micro
141