Graphics And Vertical Formatting; Built-In Diagnostic Tools; Optional Features - InfoPrint 6500 User Manual

Chapter 1

Optional Features

Graphics and Vertical Formatting

Several graphics and vertical formatting features are available:
•
Three built-in graphics generators:
•
•
•
•
Programmable electronic vertical formatting provides rapid vertical paper
movement to specified lines for printing repetitive and continuous forms.
You can use the following methods:
•
emulation modes
•

Built-in Diagnostic Tools

The following diagnostic tools are provided with the printer:
•
Comprehensive diagnostic self-tests permanently stored in the printer
•
Configuration printout
•
Data stream hex code printout
Optional Features
The following features can be ordered and installed on this printer. If you
ordered a feature at the time of purchase, the feature may already be installed
on your printer. Refer to the documentation shipped with the feature for more
details.
For detailed information about these features or for information on ordering a
feature, contact your InfoPrint sales representative.
•
Coax/Twinax Attachment:
Enables you to attach this printer to IBM host systems, such as an iSeries
or zSeries Host System. This feature also helps you to replace
Coax/Twinax printers such as the IBM 3262 Models 3 and 13, IBM 4234
Models 1, 2, and 9, and IBM 5224 Models 1 and 2. This feature can be
used with the Intelligent Printer Data Stream (IPDS) feature which is
described below.
20
Proprinter III XL bit-image graphics
Epson FX dot graphics mode
P-Series Plot
Vertical tabbing in Serial Matrix, Proprinter III XL, and Epson FX
Electronic Vertical Format Unit (EVFU) in P-Series emulation mode