InfoPrint 6500 User Manual page 178

Chapter 4
Emulation Configuration Menu
Power On ^X
Selects the ignore mode power up condition. Refer to the InfoPrint 6500 Line
Matrix Printers: Code V Programmer's Reference Manual for more
information.
•
Disable (the default). Does not select the ignore mode as the power-up
default.
•
Enable. Selects the ignore mode as the power-up default, and selects the
graphics mode (cc)PY as the power-up default. All characters are ignored
until a (cc)A command is received.
Power On ^F
Enable Free format causes the Code V to ignore carriage returns, line feeds
and all characters below 20 hex sent from the host. Refer to the
InfoPrint 6500 Line Matrix Printers: Code V Programmer's Reference Manual
for more information on Free Format.
•
Disable (the default). Does not select free format as the power-up
default.
•
Enable. Selects free format as the power-up default, and selects the
graphics mode (cc)PY as the power-up default.
Power On ^PY
Selects the graphics mode power up condition. Refer to the InfoPrint 6500
Line Matrix Printers: Code V Programmer's Reference Manual for more
information.
•
Disable (the default). Does not select the graphics mode (cc)PY as the
power-up default.
•
Enable. Selects the graphics mode (cc)PY as the power-up default.
Lines Per Inch
Defines the number of lines per inch for the Code V to use. Can also be set by
using the ^@L command. The following number of lines per inch may be
selected:
•
6 (the default)
•
7
•
8
•
9
•
10
178