InfoPrint 6500 User Manual page 307

•
For P-Series emulation, differences in supported fonts and control codes
may exist between the InfoPrint 6500-V and Printronix printers.
Downloaded character overlays and downloaded character sets are not
supported. Detailed information on supported fonts and control codes can
be found in the InfoPrint 6500 Line Matrix Printers: ASCII Programmer's
Reference Manual.
•
For P-Series XQ Variant, the InfoPrint 6500-V only prints condensed print
at 15 CPI like the Printronix P600, but unlike the P300, which printed
condensed print at either 13.3 or 16.7 CPI.
•
Emulation differences may exist between the InfoPrint 6500-V with Epson
FX 1050 emulation and the Printronix MVP 150B, which used the Epson
MX emulation.
•
Application differences may exist between the InfoPrint 6500-V and the
Printronix MVP-150C printers due to additional print quality modes which
the 6500-V does not support.
•
Printronix printers with an "L" in the model design indicate the printer has
the capability to print smaller dots. The InfoPrint 6500-V will print text-only
applications that were printed by L-Series printers. Applications requiring
the printing of anything other than text will not be supported.
•
DAVFU, DVFU, NVFU and CVFU Vertical Format Units, along with the
optional uses of the Serial Data Bit 8, are not supported.
•
Printronix P6XX0 models using older C1 controllers, which are primarily
installed in Europe, are not supported.
•
The following printers, which are similar to Printronix printers, are not
supported by the InfoPrint 6500-V printer: KPG Panda, TRILAx (Trilog
Inc.) and Gentry REVerse Paper Feed.
•
The InfoPrint 6500-V does not support compatibility with the Printronix
P1013 or the P4160.
•
InfoPrint printers with the following interfaces are not supported: S/370
Channel Attachment, QMS** 2780 or 3780 Bisync-to-ASCII attachment,
RS-232 as Current Loop, and Dataproducts Long Lines.
Compatibility
307