InfoPrint 6500 User Manual page 172

Chapter 4
Emulation Configuration Menu
Select Font
This parameter allows you to select a font for the IGP feature. Valid selections
are 0 to 33. The following predefined values are available:
0
1
2
3
4
5
6
7
8
9
10
11
12
13-23
24-31
32
33
Values 14-23 are undefined and will default to 0. You can set values 24-31 to
specific fonts; refer to the USET command.
Slash 0
This option allows you to select is zeros will print with or without a slash (Ø).
•
Disable (the default). Prints zeros without a slash (0).
•
Enable. Prints zeros with a slash (Ø) to distinguish zeros from the
alphabetical capital "O."
Lines Per Inch
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6-inch from the top of one print line to the top of the next print line. The
following number of lines per inch may be selected:
•
6 (the default)
•
8
•
9
•
10
Mono/Dual Case
This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
•
Dual Case (the default). The printer will print text in upper- and
lowercase.
•
Mono Case. The printer will print text in uppercase only.
172
U.S. ASCII (the default)
German
Swedish
Danish
Norwegian
Finnish
English
Dutch
French
Spanish
Italian
Turkish
Japanese
Reserved
User Defined Sets
0858 PC Euro Multilingual
0923 Latin 9 8859-15