InfoPrint 6500 User Manual page 40

Chapter 3
Using the Operator Panel
SCROLL/MICRO
ENTER
LINE FEED
VIEW
FORM FEED
40
Pressing the SCROLL/MICRO key in the READY state has no
effect and returns the message "INVALID KEY PRESS". In the
NOT READY state, this key micro–steps the paper downward in
1/72 inch increments. Press and hold the key to move paper at 10
increments per second. When in the MENU state, pressing this
key navigates the menu and does not move the paper.
The ENTER key operates only in the NOT READY state.
•
In the Program state it moves the display to a lower level in the
menu structure.
•
In the unlocked Program state it selects a configuration option
value.
•
In the Program state it starts and stops a Print Test selected
from the Operator Print Tests menu.
•
In the NOT READY state pressing STOP and ENTER performs
a soft reset of the printer which resets the printer to the
Power On configuration.
Pressing the ENTER and STOP keys at the same time while the
printer is in the NOT READY state causes a soft reset.
Pressing the RETURN and ENTER keys at the same time
unlocks the ENTER key when in the Program state.
Pressing the LINE FEED key when in the NOT READY state,
prints any data in the buffer and then moves the paper. Data not
in the buffer is not affected. The initial paper motion is one line at
the currently defined line spacing. LINE FEED repeats if the key
is continually held down.
Pressing the VIEW key in the NOT READY state moves the
paper from the current print position up to the tractor area for
viewing. If there is any data left in the print buffer, it is printed and
then the paper moves up for viewing. Pressing VIEW a second
time or pressing START or STOP returns the paper to its original
print position.
Pressing and releasing the FORM FEED key in the NOT READY
state moves the paper to the top–of–form on the next page. If
there is any data in the print buffer, it prints first and then the
paper moves to the next top–of–form. Data not in the print buffer
is not affected. Press the FORM FEED key in the Fault state to
silence the alarm and cause the paper to move. The top–of–form
setting is lost.