Vlan; Table 63 Show Mirror Command - Zte ZXR10 2920 User Manual

Format
{ingress|egress}
Result: This deletes destination port.
2. To display the port mirroring configuration, use command
show mirror in global configuration mode.
in Table 63.
T
A B L E
Format
show mirror
Result: This displays port mirroring configuration.
E
ND OF STEPS
Result Port mirroring is configured on ZXR10 2920/2928/2952.
Example To mirror data packets received by port 1 and port 16 onto the
monitoring port 10, configuration is as follows:
zte(cfg)# set mirror add dest-port 10 ingress
zte(cfg)# set mirror add source-port 1, 16 ingress
Use the command show mirror to view the port mirroring
configuration.
zte(cfg)#show mirror
ingress mirror infomation
---------------------------
source port: 1 16
dest port
egress mirror infomation
---------------------------
source port: none
dest port
zte(cfg)#
To mirror the data packets received by port 2 and port 3 onto
the monitoring port 4, configuration is as follows:
zte(cfg)# set mirror add dest-port 4 egress
zte(cfg)# set mirror add source-port 2, 3 egress

VLAN

Mode
6 3 S M C
H O W I R R O R O M M A N D
Mode
Global
config
]
: 10
: none
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
Function
Function
This displays port mirroring
configuration
This is shown
77