Zte ZXR10 2920 User Manual page 316

ZXR10 2920/2928/2952
302 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
[ZxR10 Boot]: zte
NOTE: Bootline not saved to NVRAM
boot device
unit number
processor number
host name
file name
inet on ethernet (e) : 10.
host inet (h)
gateway inet (g)
user (u)
ftp password (pw)
flags (f)
other (o)
Attached TCP/IP interface to marfec0.
Warning: no netmask specified.
Attaching network interface lo0.
Attaching to TFFS.
test flash passed perfectly!
MarvellDx has been initialized !
Welcome to boot manager!
Type '?' for help
[BootManager]:
Run del command to delete the configuration file,
then restart the switch.
[BootManager]:ls
KERNEL
RUNNING. CFG
config. txt
[BootManager]:del running.
[BootManager]:del config.
[BootManager]:reboot
After the switch is restarted, use the default user name
and password to log in to the switch.
: marfec
: 0
: 0
: f129750
: vxWorks
40. 89. 206
: 10. 40. 89. 204
: 10. 40. 89. 204
: 5124
: 5124
: 0x0
: MAC0-00:32:45:67:89:ab
. .
. .
cfg
txt
done.
and