Table 166 Set Stp Instance Trunk Priority Command; Table 167 Set Stp Instance Trunk Root Guard Command; Table 168 Set Stp Instance Trunk Loop-Guard Command - Zte ZXR10 2920 User Manual

Result: This sets trunk cost of the instance.
20. To set the trunk priority of the instance, use command
set stp instance <0-15> trunk < trunkid > priority <0-
255> in global configuration mode.
166.
T 1 6 6 S S
A B L E E T T P
Format
set stp instance <0-
15> trunk < trunkid
> priority <0-255>
Result: This sets the port priority of the instance.
21. To set trunk root guard of the instance, use command
set stp instance <0-15> trunk <trunkname> root-guard
{enable|disable} in global configuration mode.
shown in Table 167.
T 1 6 7 S S
A B L E E T T P
Format
set stp instance <0-
15> trunk
<trunkname> root-
guard
{enable|disable}
Result: This sets trunk root guard of the instance.
22. To set trunk loop of the instance, use command set stp
instance <0-15>
{enable|disable} in global configuration mode.
shown in Table 168.
T 1 6 8 S S
A B L E E T T P
Format
set stp instance <0-
15> trunk
<trunkname>loop-
guard
{enable|disable}
Result: This sets trunk loop of the instance.
23. To set the mapping relation between the VLAN and
instance, use
15>[add|delete] vlan <vlanlist>in global configuration
mode. This is shown in Table 169.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
I T P
N S T A N C E R U N K R I O R I T Y
Mode Function
Global This sets the port priority
config of the instance
I T R
N S T A N C E R U N K O O T
Mode Function
Global This sets trunk root guard
config of the instance
trunk <trunkname>loop-guard
I T L
N S T A N C E R U N K O O P
Mode Function
Global This sets trunk loop of the
config instance
command set
This is shown in Table
C
O M M A N D
This is
G C
U A R D O M M A N D
This is
- G C
U A R D O M M A N D
stp instance <0-
117