Table 202 Set Qos Queue Schedule Command; Table 203 Set Qos Policer Parameters Command; Table 204 Set Qos Policer Parameters Command; Set Qos - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
134 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
Format
<0-63> traffic-
class <0-3>
Result: This sets the mapping of the DSCP to QoS profile.
3. To configure
command set qos queue-schedule queue0-weight <1-
32> queue1-weight <1-32> queue2-weight <1-32>
queue3-weight <1-32> in global configuration mode.
This is shown in Table 202.
T 2 0 2 S Q
A B L E E T
Format
set qos queue-
schedule queue0-
weight <1-32>
queue1-weight
<1-32> queue2-
weight <1-32>
queue3-weight
<1-32>
Result: This configures global queue schedule profile.
4. To configure the parameters of the flux monitor,
command set qos policer counter-mode {L1 | L2 | L3} in
global configuration mode.
T 2 0 3 S Q
A B L E E T
Format
set qos policer
counter-mode {L1 |
L2 | L3}
Result: This configures the parameters of flux monitor.
Note:set counter mode of the qos policer.
works in L2 mode.
5. To configure the promise speed parameters of the flux
monitor, use
parameters <1-25165824>in global configuration mode.
This is shown in Table 203.
T 2 0 4 S Q
A B L E E T
Format
set qos policer
counter-mode {L1 |
L2 | L3}
Result: This configures the promise speed of flux monitor.
Mode
global queue
Q S C
O S U E U E C H E D U L E
Mode
global config
This is shown in Table 203.
P P
O S O L I C E R A R A M E T E R S
Mode
global config
command set
P P
O S O L I C E R A R A M E T E R S
Mode
global config
Function
DSCP to QoS profile
schedule profile,
O M M A N D
Function
This configures
global queue
schedule profile
C
O M M A N D
Function
This configures the
parameters of flux
monitor
By default, it
qos policer <0-255>
C
O M M A N D
Function
This configures the
promise speed of
flux monitor
use
use