Table 351 Set Sflow Clear Config Command; Parameters Description - Zte ZXR10 2920 User Manual

Parameters Description:

6.
clear-config in global configuration mode.
in Table 351.
T
A B L E
Format
set sflow clear-
config
Result: This clears sFlow configurations.
E
ND OF STEPS
Result sFlow has been configured on ZXR10 2920/2928/2952/5116-
FI/5124-FI.
Examples In the following instance,
addresses of sFlow proxy and collector,
sample flow function on port 1.
zte(cfg)#set sflow agent-address 192.
zte(cfg)#set sflow collector-address 192.
zte(cfg)#set sflow ingress port 1 on frequency 20000
zte(cfg)#set sflow egress port 2 on frequency 20000
zte(cfg)#
Use command show sflow to view sFlow.
Continuous mode is continuous reload-mode,
same sample frequency in each sample time.
Cpu mode is cpu control mode, is each time it finishes to
sample, cpu will generate a random sample frequency.
To clear sFlow configurations, use command set sflow
3 5 1 S F C
E T S L O W L E A R
Mode
global config
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 8 Access Service
C C
O N F I G O M M A N D
Function
This clear sFlow
configurations
it shows configurations of IP
and it enables the
168.
168.
is using
This is shown
1. 1
1. 2
209