Table 149 Set Stp Command; Table 150 Set Stp Command; Table 151 Set Stp Command; Table 152 Set Stp Agemax Command - Zte ZXR10 2920 User Manual

3. To clear the STP trunkcost, use command clear stp
instance <0-15>trunk <trunkid>cost in global configuration
mode. This is shown in Table 151.
T 1 4 9 S S
A B L E E T T P
Format
clear stp instance <0-
15>trunk<trunkid>cost
Result: This clears the STP instance trunkcost.
4. To clear the STP name, use command clear stp
name<0-15>trunk <trunkid>cost in global configuration
mode. This is shown in Table 151.
T 1 5 0 S S
A B L E E T T P
Format
clear stp name
<0-15>
Result: This clears the STP name.
5. To Enable/Disable the STP,
{enable|disable} in global configuration mode. This is
shown in Table 151.
T 1 5 1 S S
A B L E E T T P
Format
set stp
{enable|disable}
Result This is used to enable/disable the STP.
:
6. To set the STP aging time, use command set stp agemax
<6-40> in global configuration mode. This is shown in Table
152.
T 1 5 2 S S
A B L E E T T P
Format
set stp agemax <6-
40>
Result: This sets the STP aging time.
7. To set edge port,
{add|delete} port <portlist> in global configuration mode.
This is shown in Table 153.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
C
O M M A N D
Mode
Global config
C
O M M A N D
Mode
Global config
use command set stp
C
O M M A N D
Mode
Global config
A C
G E M A X O M M A N D
Mode Function
Global This sets the STP aging
config time
use command set stp edge-port
Function
This clear the
STP instance
trunkcost
Function
This clear the STP
name
Function
This enable/disable
the STP
113