Table 360 Set Zesr Domain Delete Vlan Command; Table 361 Set Zesr Domain Command; Table 362 Clear Zesr Domain Command - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
214 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
T 3 6 0 S Z
A B L E E T
Format
set zesr domain
<domainId> delete
protect_vlan
<vlanlist>
Result: This deletes protect VLAN in ZESR domain.
10. To enable/disable ZESR function in ZESR domain,
command set zesr domain <domainId> {enable|disable}
in global configuration mode.
T 3 6 1 S Z
A B L E E T
Format
set zesr domain
<domainId>
{enable|disable}
Result: This enable/disable ZESR function in ZESR domain.
Note: Enable/disable ZESR function in ZESR domain.
function in ZESR domains is disabled by default.
enabling ZESR function,
set actually.
parameter is not integrated, meanwhile ZESR control VLAN
should be enabled by users,
Tagged ports into control VLAN.
function, ports in ZESR ring are not managed by STP.
Before ZESR function is enabled, STP function in ring should
be disabled.
11. To clear ZESR domain configurations,
clear zesr domain <domainId> in global configuration
mode. This is shown in Table 362.
T 3 6 2 C
A B L E L E A R
Format
clear zesr domain
<domainId>
Result: This clears ZESR domain configurations.
Note: Clearing parameters configuration in ZESR domain can
be processed when ZESR function is disabled in ZESR domain.
12. To display ZESR domain configuration,
show zesr domain <domainId> in global configuration
mode. This is shown in Table 363.
D D V
E S R O M A I N E L E T E L A N
Mode
global config
This is shown in Table 361.
D C
E S R O M A I N O M M A N D
Mode
global config
parameters in domains should be
ZESR function can not be enabled if
and add ports in the ring as
Z D C
E S R O M A I N O M M A N D
Mode
global config
C
O M M A N D
Function
This deletes protect
VLAN in ZESR
domain
Function
This enable/disable
ZESR function in
ZESR domain
ZESR
When
To distinguish with STP
use command
Function
This clears ZESR
domain
configurations
use command
use