Table 389 Set Event Command - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
236 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
etherStatsDataSource: It is the same as that of the
history group.
through the command line,
directly.
etherStatsOwner
etherStatsStatus: It can be "valid",
"createRequest" and "invalid".
"invalid", the instance is deleted.
set to "valid" only when data source is specified.
4. To create/configure instances of the event group,
command set
<string>|type
owner <string>|community
{valid|underCreation|
SNMP config mode.
T 3 8 9 S E
A B L E E T
Format
set event <1-65535>
{description
<string>|type
{none|log|snmptrap|
logandtrap} | owner
<string>|community
<string>| status
{valid|underCreation|
createRequest|invalid}}
Result: These create/configure instances of the event group.
Command line configuration of event group is to configure
eventTable in event group.
eventDescription.
eventType: It can be "none(1)",
trap(3)" and "log-and-trap(4)".
selected, a log instance is created for each event in the
logTable.
event, the monitor sends an SNMP trap to one or more
management stations.
selected, the log is created and a trap is sent.
eventOwner.
eventCommunity.
eventStatus:
"createRequest" and "invalid".
"invalid", event instance is deleted.
5. To create/configure instances of the alarm group,
command set
65535>|variable
{absolute|delta}|startup
{rising|falling|both}|threshold <1-65535> eventindex
When configuring the data source
event <1-65535>
{none|log|snmptrap|
createRequest|invalid}}
This is shown in Table 389.
C
V E N T O M M A N D
Mode
SNMP config
The configuration involves:
When the "snmp-trap" is selected, for each
When the "log-and-trap" is
It can be "valid",
alarm <1-65535>
enter the port number
"underCreation",
When it is set to
Control status can be
{description
logandtrap}
<string>| status
Function
These
create/configure
instances of the
event group
"log(2)", "snmp-
When the "log" is
"underCreation",
When it is set to
{interval
<mib-oid>|sampletype
use
|
in
use
<1-