Table 279 Radius Isp Sharedsecret; Table 280 Default Isp Default Isp Command; Table 281 Radius Isp Fullaccount Command - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
172 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
T 2 7 9 R
A B L E A D I U S
Format
radius isp
<ispname>
sharedsecret
<string>
Result: This sets shared password.
Note: Shared password is used for data encryption between
RADIUS client and RADIUS server.
password must be consistent on the client and server.
8. To specify a default domain, use command radius isp
<ispname> defaultisp {enable|disable} in nas config
mode. This is shown in Table 280.
T 2 8 0 D
A B L E E F A U L T
Format
radius isp
<ispname>
defaultisp
{enable|disable}
Result: This specifies a default domain.
Note: Only one domain can be specified as default domain in
system.
requests without
authentication server in default domain.
9. To set full account of domain, use command radius isp
<ispname> fullaccount {enable|disable} in nas config
mode. This is shown in Table 281.
T 2 8 1 R
A B L E A D I U S
Format
radius isp
<ispname>
fullaccount
{enable|disable}
Result: This sets full account of domain.
Note: When it is specified to use full account, RADIUS client
uses "username@DomainName" as subscriber name to
request authentication of RADIUS server.
specified to use full account,
contain domain name.
10. To configure domain description, use command radius
isp <ispname> description <string> in nas config mode.
This is shown in Table 282.
I
S P S H A R E D S E C R E T
Mode
nas config
I D I C
S P E F A U L T S P O M M A N D
Mode
nas config
System will send subscriber authentication
domain name
I F C
S P U L L A C C O U N T O M M A N D
Mode
nas config
Function
This sets shared
password
Setting of shared
Function
This specifies a
default domain
specified on RADIUS
Function
This sets full
account of domain
If it is not
subscriber name will not