Configuring Imports And Exports - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
Purpose
Steps
54 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
Background of TFTP server is implemented.
server, and run copy on the switch to backup/restore files or
import/export configurations.

Configuring Imports and Exports

This topic describes the import and export functions of
configuration information of ZXR10 2920/2928/2952.
For the configuration of import and export functions,
the following steps.
1. The command show running-config toFile is used to
export the execution result of show running-config to a
config. txt and to save it in the FLASH memory.
Result: This command exports and saves it in the FLASH
memory.
Example: This file can also be uploaded to the TFTP server
to view a file.
Zte(cfg-tffs)#tftp 192.
config. txt
In normal condition,
command running. cfg file to recover configurations.
When switch can not find running.
whether the config.
switch will use it to recover configurations.
Config. txt file is used for version update.
between new version and old one is big, using running.
file of the primary version may cause mistakes after version
update. Consider the following recommendations:
Create config.
Use the newly downloaded version to reboot switch after
deleting running.
Important! Switch will use config.
configurations.
deleted in new version,
successfully.
them manually.
Use command saveconfig to create a running.
for new version after update is finished.
2. The command readconfig is to read the configuration
commands in the config.
to the switch for resolution and execution.
Result: Contents of the config.
as needed and then downloaded to the switch by using the
command tftp.
168.
when rebooting the switch,
txt file exists and when file exists,
txt file before version update.
cfg file of old version.
When command format is not modified or
configurations will be recovered
If configurations is not recovered,
txt in the FLASH and sends them
txt can be edited manually
Start the TFTP
perform
1. 102 upload
use
cfg file, it will check
When the span
cfg
txt file to recover
recover
cfg file