Table 266 Dot1X Quiet Period Command; Table 267 Dot1X Quiet Period Command; Table 268 Dot1X Supplicant Timeout Command - Zte ZXR10 2920 User Manual

T 2 6 6 D 1
A B L E O T X
Format
dot1x quiet-
period <0-65535>
Result: This sets interval between first authentication failure
of authentication system and next authentication request.
2. To set time that authentication system needs to wait
before it can resend EAPOL data packet because it does not
receive the response from the client, use command dot1x
tx-period <1-65535> in nas config mode.
in Table 267.
T 2 6 7 D 1
A B L E O T X
Format
dot1x quiet-
period <0-65535>
Result: This set time that authentication system needs to
wait before it can resend EAPOL data packet.
3. To set timeout time for authentication system to receive
data packets from authentication client system,
command dot1x supplicant-timeout <1-65535> in nas
config mode. This is shown in Table 268.
T 2 6 8 D 1
A B L E O T X
Format
dot1x supplicant-
timeout <1-
65535>
Result: This set timeout time for authentication system to
receive data packets from authentication client system.
4. To set timeout time for authentication system to receive
data packets from authentication server,
dot1x server-timeout <1-65535> in nas config mode.
This is shown in Table 269.
Confidential and Proprietary Information of ZTE CORPORATION
Q P C
U I E T E R I O D O M M A N D
Mode
nas config
Q P C
U I E T E R I O D O M M A N D
Mode
nas config
S T C
U P P L I C A N T I M E O U T
Mode
nas config
Chapter 8 Access Service
Function
This sets interval
between first
authentication
failure of
authentication
system and next
authentication
request
This is shown
Function
This set time that
authentication
system needs to
wait before it can
resend EAPOL data
packet
O M M A N D
Function
This set timeout
time for
authentication
system to receive
data packets from
authentication client
system
use command
use
167