Configuring Terminal Record - Zte ZXR10 2920 User Manual

F
8. To configure the attribute "Aggretator Mode" of selected
assembling group in the page,
assembling group.
and click
select port in the port column and click
E
ND OF STEPS
Result LACP management has been configured.
Note Only ports with same attributes can be binded to same
assembling group.
is up to 8.
Important! Avoid binding port connected to network management host to
assembling group.
interrupted.

Configuring Terminal Record

Purpose This topic describes the configuration of terminal record.
Steps For the configuration of terminal record, perform the following
steps.
1. Click the catalog tree in the left of the system main page
Monitoring > Terminal Log to open the terminal log
information page, as shown in Figure 65.
6 4 A
I G U R E S S E M B L I N G
button or free port from assembling group,
Number of ports binded to assembling group
Otherwise the network management will be
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 9 Network Management
G I
R O U P N F O R M A T I O N
and to bind port to
Select port in the optional port column
>button).
281