Table 219 Set Policy Mirror Command; Table 220 Set Policy Redirect Command; Table 221 Set Policy Qos Remark Command - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
140 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
T 2 1 9 S P
A B L E E T
Format
set policy mirror
in acl <1-350>
rule <1-500>
{cpu|analyze-
port}
Result: This configures the mirror for the traffic.
20. Flow redirection is to redirect the designated data flow to
the egress port designated by users, and monitor the flow.
To redirect the data flow, use command set policy redirect
in acl <1-349> rule <1-500> {cpu|port <portname>} in
global configuration mode.
T 2 2 0 S P
A B L E E T
Format
set policy redirect
in acl <1-349>
rule <1-500>
{cpu|port
<portname>}
Result: This redirects the data flow.
21. To set policy statistics,
statistics in acl <1-349> rule <1-500> counter <0-31>
in global configuration mode.
T 2 2 1 S P
A B L E E T
Format
set policy statistics
in acl <1-349> rule
<1-500> counter
<0-31>
Result: This sets policy statistics.
22. Remarking the flow is to remark the QoS attribution of
the designated flow.
marking on the port.
set police remark in acl <1-349> rule <1-500> up <0-
7> in global configuration mode.
222.
M C
O L I C Y I R R O R O M M A N D
Mode
global config
This is shown in Table 220.
R C
O L I C Y E D I R E C T O M M A N D
Mode
global config
use command set policy
This is shown in Table 222.
Q R C
O L I C Y O S E M A R K O M M A N D
Mode
global config
This happens after the primary QoS
To remark the flow, use command
Function
This configures the
mirror for the traffic
Function
This redirects the
data flow
Function
This sets policy
statistics
This is shown in Table