Table 185 Show Stp Trunk Command; Table 186 Show Stp Relay Command - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
Result
Example
122 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
T 1 8 5 S
A B L E H O W
Format
show stp trunk <trunklist>
Result: This displays stp trunk information.
v. To display stp relay information,
show stp relay in global configuration mode.
shown in Table 186.
T 1 8 6 S
A B L E H O W
Format
show stp relay
Result: This displays stp relay information.
E
ND OF STEPS
STP has been configured.
The following is an example of MSTP configuration.
Create instance 1, set up mapping relations with VLANs 10 to
20, and set the name as zte.
zte(cfg)#set stp instance 1 add vlan 10-20
zte(cfg)#set stp name zte
zte(cfg)#set stp revision 10
zte(cfg)#show stp
The spanning_tree protocol is enabled!
The STP ForceVersion is MSTP !
Revision: 10
Bpdu interval: 100
Cisco key:
Cisco digest:
Huawei key:
Huawei digest: 0x00000000000000000000000000000000
Instance VlanMap
-------- -------------------
0 1-9, 21-4094
1 10-20
Zte(cfg)#
Set the bridge priority and port priority of the instance.
S T C
T P R U N K O M M A N D
Mode
Global
config
S R C
T P E L A Y O M M A N D
Mode
Global
config
The MST version is 10.
Name: zte
0x13ac06a62e47fd51f95d2ba243cd0346
0x00000000000000000000000000000000
0x13ac06a62e47fd51f95d2ba243cd0346
Function
This displays stp trunk
information
use command
This is
Function
This displays stp relay
information