Zte ZXR10 2920 User Manual page 77

6. In the [BootManager] state,
upgrade the version.
the version file from the TFTP server to the FLASH memory:
[BootManager]:tftp 10.
Loading.
[BootManager]:ls
snmpboots.
startcfg.
running.
kernel.
[BootManager]:
7. In the [BootManager] state, execute the command reboot
to restart the switch by using the new version.
switch is started normally,
check whether the new version is running in the memory.
When the switch is not started normally,
version upgrade fails.
upgrade procedure.
E
ND OF STEPS
Result Software version upgrade has been completed.
The following shows how to download
. . done!
v3
txt
cfg
z
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 System Management
use the command tftp to
40. 89. 78 kernel.
35
1378
231916
1311339
use the command version to
it indicates the
In this case, repeat the above
z
If the
63