Configuring Lacp; Table 88 Set Lacp Command; Table 89 Set Lacp Aggregator Command - Zte ZXR10 2920 User Manual

Description
Aggregate Link
Purpose
Steps
Link aggregation
transmission media and transmission rate are "bound" together,
making them look like one link logically.
known as Trunking.
the switches or between the switch and server to increase the
bandwidth in multiples and simultaneously.
becomes an import technology in broadening link bandwidth and
creating link transmission flexibility and redundancy.
Aggregated link is also called trunk.
blocked or faulty, data packets will be distributed to other ports
of this trunk for transmission.
packets will be re-distributed to all the normal ports of this trunk
for transmission.
ZXR10 2920/2928/2952 supports a maximum of 15 aggregation
groups. In each aggregation group,
participating in aggregation does not exceed eight.
participating in the aggregation must have same transmission
media type and same transmission rate.

Configuring LACP

This topic describes the configuration of link aggregation.
For configuration of link aggregation,
steps.
1. To Enable/Disable the LACP function, use command set
lacp {enable|disable} in global configuration mode.
is shown in Table 88.
T 8 8 S L
A B L E E T A C P
Format
set lacp
{enable|disable}
Result: This Enable/Disable the LACP function.
Note: By default, the LACP function is disabled.
2. To add a specified port to the aggregation group,
command set
<portlist> in global configuration mode.
Table 89.
T 8 9 S L
A B L E E T A C P
Format
set lacp
aggregator
<trunkid> add
port <portlist>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Service Configuration
means that physical
It allows parallel physical links between
If this port recovers,
C
O M M A N D
Mode Function
Global This Enable/Disable the LACP
config function
lacp aggregator <trunkid> add
A C
G G R E G A T O R O M M A N D
Mode Function
Global This adds a specified port to the
config aggregation group
links with same
This concept is also
As a result,
If a port of trunk is
data
number of links
Links
perform the following
This
use
port
This is shown in
it
87