Table 262 Dot1X Re-Authentication Period Command; Table 263 Aaa Control Port Keepalive Command; Table 264 Aaa Control Port Keepalive Period - Zte ZXR10 2920 User Manual

T 2 6 2 D 1
A B L E O T X
Format
dot1x re-
authenticate
period <1-
4294967295>
Result: This sets the re-authentication interval.
Important! To judge whether access subscriber maintains
connection all time,
authentication of this subscriber.
to initiate a complete authentication process for each on-line
subscriber. If number of subscribers is large, there will be
a lot of authentication packets, which brings a heavy burden
to the switch.
7. To enable/disable abnormal off-line detection mechanism
of the port, use command aaa-control port <portlist>
keepalive {enable|disable} in nas config mode.
shown in Table 263.
T 2 6 3 A A A C
A B L E O N T R O L P O R T
Format
aaa-control port
<portlist>
keepalive
{enable|disable}
Result: This enable/disable abnormal off-line detection
mechanism of the port.
8. To set the abnormal off-line detection period of the port,
use command aaa-control
period <1-3600> in nas config mode.
Table 264.
T 2 6 4 A A A C
A B L E O N T R O L
Format
aaa-control port
<portlist>
keepalive period
<1-3600>
Result: This sets the abnormal off-line detection period of
the port.
Note: The following are the main features of abnormal off-
line detection mechanism.
Besides re-authentication mechanism, NAS module also
introduces abnormal off-line detection mechanism to
judge whether subscriber still keeps the connection.
Abnormal off-line detection mechanism only requires a
Confidential and Proprietary Information of ZTE CORPORATION
R - A P
E U T H E N T I C A T I O N E R I O D
Mode
nas config
NAS can periodically request re-
K
E E P A L I V E C O M M A N D
Mode
nas config
port <portlist> keepalive
P K
O R T E E P A L I V E
Mode
nas config
Chapter 8 Access Service
C
O M M A N D
Function
This sets the re-
authentication
interval
Re-authentication needs
This is
Function
This enable/disable
abnormal off-line
detection
mechanism of the
port
This is shown in
P
E R I O D
Function
This sets the
abnormal off-line
detection period of
the port
165