Configuring Iptv Global Parameters; Table 122 Iptv Control Log-Time Command; Table 123 Iptv Control Prvcount Count Command; Table 124 Iptv Control Prvinterval Command - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
Purpose
Steps
102 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
broadcast signal sent through the provider's backbone network
and servers, allowing viewers to select content on demand, and
take advantage of other interactive TV options.
used through PC or "IP machine box + TV".

Configuring IPTV Global Parameters

This topic describes the configuration of IPTV.
For the configuration of IPTV, perform the following steps.
1. To set the least view time, use command iptv control
log-time<1-65534> in nas config mode.
Table 122.
T 1 2 2 I P T V C
A B L E
Format
iptv control log-
time<1-65534>
Result: This sets the least view time.
2. To set the max preview counts on global, use command
iptv control prvcount count in nas config mode.
shown in Table 123.
T 1 2 3 I C
A B L E P T V
Format
iptv control
prvcount count
Result: This sets the max preview counts on global.
3. To set the least preview interval of global, use command
iptv control prvinterval in nas config mode.
shown
T 1 2 4 I C
A B L E P T V
Format
iptv control
prvinterval
Result: This sets the least preview interval of global.
4. To set the max preview time of global,
iptv control prvtime in nas config mode.
Table 125.
L - T C
O N T R O L O G I M E O M M A N D
Mode Function
nas This sets the least view time
config
mode
P C
O N T R O L R V C O U N T O U N T
Mode Function
nas
This sets the max preview counts
config
on global
mode
P C
O N T R O L R V I N T E R V A L
Mode Function
nas
This sets the least preview interval
config
of global
mode
IPTV can be
This is shown in
This is
C
O M M A N D
This is
O M M A N D
use command
This is shown in