Dhcpv6 Configuration Examples; Dhcpv6 Server Configuration Instance; Figure 20-3 Dhcpv6 Server Configuration Instance - Zte ZXR10 5900E Configuration Manual

ZXR10 5900E Series Configuration Guide (IPv6)
For a description of the sample output, refer to the following table:
Command Output
DUID
IA NA
IA ID
T1
T2

20.4 DHCPv6 Configuration Examples

20.4.1 DHCPv6 Server Configuration Instance

Configuration Description
As shown in
PC obtains an IP address dynamically through DHCP.

Figure 20-3 DHCPv6 Server Configuration Instance

The configuration requirements of ZXR10 are described below.
l In global configuration mode, configure an IPv6 address, an IPv6 pool, a DHCPv6
pool and a DHCPv6 policy. Enable DHCPv6 function.
l
In interface configuration mode, configure an IP address and DHCP server mode.
Bind the DHCPv6 policy.
Configuration Thought
1. Enable IPv6 on the interface and configure an IPv6 address.
2. Configure an IPv6 address pool and configure related parameters such as the range
of the address pool. The range of the addresses in the pool should be in the same
network segment.
3. Enable DHCPv6 globally.
4. Configure DHCPv6 pool. The DHCPv6 pool needs to bind to an IP pool. Configures
DNS, lease time and other parameters.
5. Configure DHCPv6 policy. The DHCPv6 policy is a policy option. Many priorities are
supported by a name for policy management.
SJ-20150114102049-011|2015-01-15 (R1.0)
Figure 20-3, ZXR10 acts as both DHCP server and the default gateway. The
Description
Unique identifier of a client.
IA type. IA NA means a temporary address. IA PD means
allocated by a prefix.
IA identifier.
Recommended Renew interval.
Recommended Rebind interval.
20-10
ZTE Proprietary and Confidential