Mac-Based Vlan Command Configuration - Zte ZXR10 2910E-PS Configuration Manual

zte(cfg)#cfm md-session 10 ma-session 10 mep-id 20 state enable
zte(cfg)#cfm md-session 10 ma-session 10 mep-id 20 ccm-send enable
zte(cfg)#cfm md-session 10 ma-session 10 mep-id 20 ccm-receive enable
zte(cfg)#cfm md-session 10 ma-session 10 mep-id 20 assign port 5
zte(cfg)#create cfm md-session 10 ma-session 10 rmep-session 10 rmep-id 10 remote-mac
00.d0.d0.c0.00.02
zte(cfg)#cfm md-session 10 ma-session 10 mep-id 10 ccm-receive enable
zte(cfg)#cfm md-session 10 ma-session 10 mep-id 20 ais (lck) enable
zte(cfg)#cfm md-session 10 ma-session 10 mep-id 20 client-level 5
Configuration on S4:
zte(cfg)#cfm enable
zte(cfg)#create cfm md-session 1 name zte_1 level 5
zte(cfg)#create cfm md-session 1 ma-session 1 name zte_zte_1
zte(cfg)#cfm md-session 1 ma-session 1 primary-vlan 100
zte(cfg)#create cfm md-session 1 ma-session 1 mep-session 1 mep-id 2 direction down
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 2 state enable
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 2 ccm-send enable
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 2 ccm-receive enable
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 2 assign port 6
zte(cfg)#create cfm md-session 1 ma-session 1 rmep-session 2 rmep-id 1 remote-mac
00.d0.d0.c0.00.01
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 1 ccm-receive enable
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 1 ais (lck) enable
l Configuration Verification
Disconnect the link between S2 and S3. After that, alarms occur on only S2 and S3,
and unrelated alarms on S1 and S4 are restricted due to the AIS function.
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 1 (2)
View the measurement result by using the command for displaying MEP information
that is provided by 802.1ag.

4.43 MAC-based VLAN Command Configuration

MAC-based VLAN Overview
MAC-based VLAN decides the VLAN for forwarding an untagged frame based on the
source MAC address of the frame. This technology allows packets to be transmitted in
different VLANs and provides different services to different users.
Configuring MAC-based VLAN
MAC-based VLAN configuration includes the following commands:
SJ-20120409144109-002|2012-07-02(R1.0)
Chapter 4 Service Configuration
4-149
ZTE Proprietary and Confidential
one-lm send-packet