Table of Contents
Advertisement
Running Configuration
■
New Firmware File: Specifies the name of the code file on the server. The
new firmware file name should not contain slashes (\ or /), the leading letter
of the file name should not be a period (.), and the maximum length for file
names on the FTP/TFTP server is 255 characters or 32 characters for files on
the access point. (Valid characters: A-Z, a-z, 0-9, ". " , "-", "_")
IP Address: IP address or host name of FTP or TFTP server.
■
Username: The user ID used for login on an FTP server.
■
Password: The password used for login on an FTP server.
■
◆
Start Upgrade — Commences the upgrade process.
A copy of a previous running configuration may be uploaded to the access point as
a saved file from a remote location, or the current configuration saved and stored
for restoration purposes at a later point. A configuration file may be saved or
downloaded to/from a specified remote FTP or TFTP server.
Figure 48: Running Configuration File
– 93 –
Chapter 7
| Maintenance Settings
Running Configuration
Advertisement
Table of Contents
