Table of Contents
Advertisement
Chapter 13
| System Clock Commands
sntp-server daylight-
saving
hour - Sets the hour. (Range: 0-23)
minute - Sets the minute. (Range: 0-59)
Default Setting
00:14:00, January 1, 1970
Command Mode
Global Configuration
Example
This example sets the system clock to 12:10 April 27, 2009.
AP(config)# sntp-server date-time 2009 4 27 12 10
AP(config)#
Related Commands
sntp-server enabled
This command sets the start and end dates for daylight savings time. Use the no
form to disable daylight savings time.
Syntax
sntp-server daylight-saving [date-week <start-month> <start-week> <start-
day> <end-month> <end-week> <end-day>]
no sntp-server daylight-saving
date-week - The key word to set the date on which to start and end the
daylight-saving time.
start-month - Sets the start month. (Range: 1-12)
start-week - Sets the start week. (Range: 1-5)
start-day - Sets the start day. (Range: 0-6, where 0 is Sunday)
end-month - Sets the end month. (Range: 1-12)
end-week - Sets the end week. (Range: 1-5)
end-day - Sets the end day. (Range: 0-6, where 0 is Sunday)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
◆
The command sets the system clock back one hour during the specified period.
– 146 –
Advertisement
Table of Contents
