Wds Status; Figure 57: Wds Status - SMC Networks SMC2890W-AN Management Manual

802.11a/b/g/n outdoor dual-band wireless access point
Hide thumbs Also See for SMC2890W-AN:
Table of Contents

Advertisement

Chapter 8
| Status Information

WDS Status

WDS Status
The WDS Status window shows the WDS information for the 2.4 GHz and 5 GHz
radio interfaces.

Figure 57: WDS Status

The following items are displayed on this page:
Auto Refresh Setting — Enables the automatic refresh of WDS status
information. When enabled, you can also set the time interval between each
status refresh.
WDS-STA Status — The status of other APs in WDS-STA mode connected to
the AP interfaces.
Station Address — The MAC address of the AP client.
RSSI — The Receive Signal Strength Indicator of the received signal sent
from the peer WDS client.
Remote RSSI — The Receive Signal Strength Indicator of the AP signal
received by the peer WDS-STA client.
TxRate (Mbps) — The data tranmit rate to the AP client.
– 104 –

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smc2891w-an

Table of Contents