Table of Contents
Advertisement
Chapter 3
| System Settings
RADIUS Settings
RADIUS Accounting
Figure 12: RADIUS Settings
The following items are displayed on the RADIUS Settings page:
◆
RADIUS Status — Enables/disables the primary RADIUS server.
◆
IP Address — Specifies the IP address or host name of the RADIUS server.
◆
Port (1024-65535) — The UDP port number used by the RADIUS server for
authentication messages. (Range: 1024-65535; Default: 1812)
◆
Key — A shared text string used to encrypt messages between the access point
and the RADIUS server. Be sure that the same text string is specified on the
RADIUS server. Do not use blank spaces in the string. (Maximum length: 255
characters)
The following items are displayed on the RADIUS Settings page:
◆
Account Status — Enables/disables RADIUS accounting.
◆
IP Address — Specifies the IP address or host name of the RADIUS accounting
server.
– 38 –
Advertisement
Table of Contents
