Link Layer Discovery Commands; Table 24: Link Layer Discovery Commands - SMC Networks SMC2890W-AN Management Manual

28
lldp service

Link Layer Discovery Commands

LLDP allows devices in the local broadcast domain to share information about
themselves. LLDP-capable devices periodically transmit information in messages
called Type Length Value (TLV) fields to neighbor devices. Advertised information is
represented in Type Length Value (TLV) format according to the IEEE 802.1ab
standard, and can include details such as device identification, capabilities and
configuration settings.
This information can be used by SNMP applications to simplify troubleshooting,
enhance network management, and maintain an accurate network topology.

Table 24: Link Layer Discovery Commands

Command
lldp service
lldp transmit hold-muliplier
lldp transmit interval
lldp transmit re-init-delay
lldp transmit delay-to-local-
change
show lldp
This command enables LLDP on the access point. Use the no form to disable LLDP.
Syntax
[no] lldp service
Default Setting
Enabled
Command Mode
Global Configuration
Example
AP(config)# lldp service
AP(config)#
Function
Enables the transmission of LLDP information
Sets the message transmission hold time
Sets the message transmission interval time
Sets the reinitial delay time
Sets the transmission delay value
Shows the current LLDP information
– 250 –
Mode Page
GC 250
GC 251
GC 251
GC 252
GC 252
Exec 253