show bridge port-conf
interface
Example
AP# show bridge br-conf all
BR0 configuration
========================================
BRIDGE MAC
: 00:12:cf:a2:54:30
Priority
: 32768
Hello Time
: 2
Maximum Age
: 20
Forward Delay
: 0
========================================
AP#
This command displays spanning tree settings for specified interfaces.
Syntax
show bridge port-conf interface {all | ethernet | wireless index <all | vap
vap-index>}
all - Keyword to display STP settings for all interfaces.
ethernet - Keyword to display STP settings for the Ethernet interface.
wireless - Keyword to display STP settings for the Wireless interface.
vap - Keyword to display STP settings for a specific VAP interface.
Command Mode
Exec
Example
AP#show bridge port-conf interface all
ETH0 configuration
========================================
Link Port Priority
Link Path Cost
========================================
ATH0 configuration
========================================
Link Port Priority
Link Path Cost
========================================
ATH1 configuration
========================================
Link Port Priority
Link Path Cost
========================================
ATH2 configuration
========================================
Link Port Priority
Link Path Cost
========================================
Chapter 21
: 32
: 4
: 32
: 19
: 32
: 19
: 32
: 19
– 193 –
| Spanning Tree Commands