SMC Networks SMC2890W-AN Management Manual page 220

Chapter 24
| Wireless Interface Commands
auth-timeout-interval
multicast-enhance
This command configures the time interval within which clients must complete
authentication to the VAP interface.
Syntax
auth-timeout-interval <minutes>
minutes - The number of minutes before re-authentication. (Range: 3-60
minutes)
Default Setting
3 minutes
Command Mode
Interface Configuration (Wireless-VAP)
Example
AP(if-wireless 0: VAP[0])# auth-timeout-interval 10
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
This command enables a feature that improves multicast video quality for wireless
clients. Use the no form to disable the feature.
Syntax
[no] multicast-enhance
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
When a wireless client joins a multicast group, this feature converts multicast
packets to unicast packets to improve multicast video quality.
Example
AP(if-wireless 0: VAP[0])# multicast-enhance
set_vap_mcastenhance 0 0 2
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
– 220 –